HDPE Waterproof Membrane

BLF Pre-applied waterproof membrane is made out of polymer sheet (HDPE or TPO)adhesive and weather resistant granular layer. It is specifically developed to elevate the construction and application performance of below grade waterproofing. Based on adhesive to adhesive bond on selvedge overlaps design, it enhances the installation applicability and significantly improves the overlapping strength. It could achieve effective connection between membranes when in harsh jobsite condition.

Specification

BLF FLEX 6010, BLF FLEX 6020

BLF FLEX 6010 reinforced HDPE membrane is adaptive to mechanically mounted waterproof system.

BLF FLEX 6020 reinforced TPO membrane is adaptive to mechanically mounted waterproof system.

Width(m):2.0

Thickness (mm):1.2,1.5.2.0

Length(m):25

Note: Thickness and Length can be customized

Features

1.Excellent Mechanical Properties

2.Excellent adhesive

3.Excellent waterproof performance

4.Various ways of lapping Executive Standard:

GB/T TPO HDPE PRE-APPLIED WATERPROOF MEMBRANE STANDARD

Performance

Tension (N/50mm)

≥600

Tensile strength (MPa)

≥16

Cold bending

body material-35℃ No crack Adhesive-25℃ No crack Heat resistance

80℃2H No slip flow drip Watertightness(0.3MPa,120min)

Performance

Tension (N/50mm)

≥600

Tensile strength (MPa)

≥16

Cold bending

body material -35℃ No crack

Adhesive -25℃ No crack

Heat resistance

80℃ 2H No slip flow drip

Watertightness(0.3MPa,120min)